You may spend most of your time thinking about how to save on your energy bill, but it’s also worth keeping an eye on your water usage. There are seven main culprits for what uses up the most water, according to Water Footprint Calculator.
1. Toilet
Household per day: 33 gallons
Percent of total usage: 24%
There are a number of ways that you can cut down on the amount of water your toilet uses, ranging from adjusting the water level to investing in a low-flow toilet. Besides all of that water, there are also plenty of things you shouldn’t flush down the toilet.
2. Shower
Household per day: 27 gallons
Percent of total usage: 20%
Consider upgrading to a low-flow shower head, which can cut down on water usage while still maintaining a strong spray.
3. Faucet
Household per day: 27 gallons
Percent of total usage: 20%
4. Washing Machine
Household per day: 22 gallons
Percent of total usage: 16%
And don’t forget about all of those things you shouldn’t put in your washing machine.
5. Leaks
Household per day: 18 gallons
Percent of total usage: 13%
Trending on Cheapism
6. Bath
Household per day: 4 gallons
Percent of total usage: 3%
7. Dishwasher
Household per day: 2 gallons
Percent of total usage: 2%
8. Other
Household per day: 4 gallons
Percent of total usage: 3%
Sign up for our newsletter
How to Save Water in the Bathroom
There are a lot of ways to save water in the bathroom, though some of them might require a bit of an investment at first. Replacing your toilets with newer models like WaterSense, for example, can save 20 to 60% of your water usage. Same goes for your showerheads.
If you’re looking to save money without replacing stuff, it’s all about being conscientious. Don’t leave the sink running while you brush your teeth. Take shorter showers and try not to fill up the bathtub. Don’t throw a bunch of nonsense and trash into your toilet; flush only when necessary.
How to Save Water in the Kitchen
Fans of Tetris may enjoy making sure their dishwashers are absolutely full before running a load, but many of us run small cycles that could probably have fit more stuff. Scrubbing pots and pans without running the water on them is another little hack that adds up. And of course, make sure your faucet isn’t leaking.
How to Save Water With the Laundry
Make sure you’re using the right settings on your washer for starters; make sure your washer is set to the proper load size. Using the right amount of detergent is important also, since washers will often add more water if there’s too much soap going on inside the load. And most obvious of all, save up laundry day for large quantities rather than smaller, more frequent loads.
